Geeks With Blogs


Add to Google

Tim Hibbard CEO for EnGraph software

To enable your Cisco PIX firewall for VPN access:

1) Connect the cable between PIX and your COM port
2) Open Hyperterminal (All Programs->Accessories->Communications)
3) When the Connect to box opens up, select the COM port that the cable is connected to
4) Enter your password when prompted
5) Enter = config t - press enter
6) Enter = fixup protocol pptp 1723 - press enter
7) Enter = write mem - press enter

Exit Hyperterminal

Posted on Thursday, June 16, 2005 4:15 PM Remoting | Back to top

Comments on this post: Configure Cisco PIX for VPN

# re: Configure Cisco PIX for VPN
Requesting Gravatar...
this was great! I've been racking my brain on what was going on...this fixed the problem!
Left by DJ on Apr 03, 2007 2:23 PM

# re: Configure Cisco PIX for VPN
Requesting Gravatar...
i want configure vp in cisco pix.
Left by palak on Apr 25, 2008 2:11 PM

Your comment:
 (will show your gravatar)

Copyright © Tim Hibbard | Powered by: