Geeks With Blogs

News
Disclaimer: The views expressed on this blog are my own and do not necessarily reflect the views of my employer.

Creative Commons License


Check out my about.me profile!

INETA Community Speakers Program

Follow enriquelima on Twitter
Locations of visitors to this page

Intentional Thinking Enrique Lima

In continuing with the post that I started last week, this week I focus on how I used PowerShell to install Hyper-V on Windows 8 and then create all necessary items to continue the creation of the SharePoint lab running on Hyper-V on Windows 8.

First thing, in all situations I started PowerShell as Administrator. And yes, many of this items can be done and worked on through the GUI.  But, the point is how do I automate. Also, assumptions here are you have a licensed version of Windows 8, and your hardware support the use of Hyper-V.

Enabling Hyper-V using PowerShell

enable-WindowsOptionalFeature -Online -FeatureName Microsoft-Hyper-V -All

Once the above has been executed, your system will restart and Hyper-V will be enabled in the process.

Since it is now in place, how about opening PowerShell as Administrator again.  Now we will configure the Virtual Switch (again, yes, we could do this from Hyper-V Manager, but the goal is to script it).

Adding Private or Internal virtual switch types

To add a private or internal switch type you will need the following:

New-VMSwitch “Internal Network” –SwitchType Internal

The key parameter in the above statement is –SwitchType, which can be followed by either Internal or Private.

Adding External virtual switch types

To add an external switch type you will do a couple of items, first get information on the available network adapters, and then create the switch attached to a specific network adapter.  You will notice in order to create this the –SwitchType parameter is not used.

First, check the network adapters available.

Get-NetAdapter

From that output we will take the Name property/field. Then we will use that information to provision the external switch. From the example below remember to use the name that applies to your environment.

New-VMSwitch “External Network” –NetAdapterName “Local Area Connection 2”

Now, the network portion is done and ready.  We will proceed to provision the VMs now.

Provisioning Virtual Machines

The statement to provision the VM will look as follows:

New-VM -Name $LabDC -Path $LabPath -MemoryStartupBytes 768MB -NewVHDPath $LabPath\$LabDC.vhdx -NewVHDSizeBytes 60GB -SwitchName $InternalNet

For simplicity and understanding I am linking here the script with the process, broken into two separate scripts, one for the creation of the External Network and the other including the Internal Network creation and the VM provision process.

Hope this helps in the process.

Script

Create External Network

 

VM Provisioning

 

Posted on Sunday, April 28, 2013 7:51 PM SQL Server , Misc , SharePoint , Tools , Virtualization , PowerShell | Back to top


Comments on this post: Configuration of Hyper-V and creation of VMs

comments powered by Disqus

Copyright © Enrique Lima | Powered by: GeeksWithBlogs.net